« Some C64 haxxage | Home | StackBook Part 4 - Mo… »

Fixing a power brick...

25 08 09 - 10:46

I had the problem of the power brick for the pictureframe not working. I'm not entirely sure why, but I think it was a loose connection inside (the only power brick for the G3 I had left had a huge crack through it - I sold the last good one with the 3400...).

But I also had a PowerBook G4 power brick that had a short right up near the plug. Since they're both the same voltage, I cut the cables and spliced them in. And it worked - so now I have a nice smaller power brick for the G3 Pictureframe that works properly.